Publications Library
Characterization by sampling and in-situ testing-Connecticut Valley varved clay. Studia Geotechnica et Mechanica. 27(3/4):107-120.
.
2005. Estimating autocovariance of in‐situ soil properties. Journal of Geotechnical Engineering. 119(1):147-166.
.
1993. In situ measurement of hydraulic conductivity of saturated soils. Geotechnical Engineering Journal of the SEAGS & AGSSEA. 43(4):63-71.
.
2012. Methods of determining in situ oxygen profiles in the vadose zone of granular soils. Sampling Environmental Media, American Society for Testing and Materials. Special Technical Publication No. 1282:271-288.
.
1996. Effect of nonuniform stresses on measured DSS stress‐strain behavior. Journal of Geotechnical Engineering. 120(5):892-912.
.
1994. Geotechnical characterisation and engineering properties of Burswood clay. Géotechnique. 61(7):575-591.
.
2011. The multidirectional direct simple shear apparatus. Geotechnical Testing Journal. 16(6):283-295.
.
1993. Instability in loose sand: Experimental results and numerical simulations with a microstructural model. Springer Series in Geomechanics and Geoengineering . :13-31.
.
2011. Direct method of damage localization for civil structures via shape comparison of dynamic response measurements. Computers & Structures. 92-93:297-307.
.
2012. Sensor location selection for structures via identifiability analysis in the time-scale domain. Journal of Sound and Vibration. 332(24):6296–6311.
.
2013. Measurement of Motor Fuel Contaminated Soil Leachate. Hydrocarbon Contaminated Soils.
.
1993. Air Sparging Laboratory Study. Air Sparging for Site Remediation. :108-111.
.
1994. High Rate Flocculation, Flotation and Filtration in Potable Water Treatment. Chemical Water and Wastewater Treatment IV. :201-211.
.
1996. Macroscopic relations of urban traffic variables: bifurcations, multivaluedness, and instability. Transportation Research Part B: Methodological. 45(1):278-288.
.
2011. The potential of parsimonious models for understanding large scale transportation systems and answering big picture questions. EURO Journal on Transportation and Logistics. 1(1):47-65.
.
2012. Destruction of chlorination byproducts with sulfite. Environmental Science & Technology. 23(11):1412–1419.
.
1989. Controlling DBPs by delaying chlorine addition until after filtration. Journal of the New England Water Works Association. 117(4):243-251.
.
2003. Benchmarking railway vibrations–Track, vehicle, ground and building effects. Construction and Building Materials. 92:64–81.
.
2015. Multiobjective Generating Techniques for Risk/Benefit Analysis. Risk/Benefit Analysis in Water Resources Planning and Management. :123-134.
.
1981. Characterization and strength modeling of laminated bio-based composites. Bio-Based Composites for High-Performance Materials: From Strategy to Industrial Application. :336pages.
.
2016. Experimental behavior of a continuous metal connector for a wood-concrete composite system. Forest Products Journal. 54(6):76-84.
.
2004. Industry survey of state of practice for helical piles and tiebacks. Journal of the Deep Foundations Institute. 9(1):21-41.
.
2014. Enhanced nitrogen removal in bio-electrochemical systems by pH control. Biotechnology Letters. 31(10):1537–1543.
.
2009. Terrazzo design: avoiding stress-related deterioration and cracking. Journal of Performance of Constructed Facilities. 25(6):514-521.
.
2011. Integral Abutment Bridge Data from Three Steel Girder Bridges. World Steel Bridge Symposium.
.
2014. A new admixture to mitigate corrosion problems. Concrete International. 28(8):78-82.
.
2006. Field and analytical studies of the first folded-plate girder bridge. Journal of Bridge Engineering. 21(11):04016074-1-04016074-14.
.
2016. Integral abutment bridge behavior: parametric analysis of a Massachusetts bridge. Journal of Bridge Engineering. 12(1):64-71.
.
2007. Integral Abutment Bridge Monitoring Program in Vermont. Transportation Research Board 89th Annual Meeting. :12p.
.
2010. Evaluation of Bats in New England Bridges: Research in Progress. Transportation Research Board 95th Annual Meeting.
.
2016.