Length effects in tensile strength in the orthogonal directions of structural composite lumber. Journal of Engineering Mechanics. 39(4). 2011.
Variability response functions for apparent material properties. Probabilistic Engineering Mechanics. 44(Special Issue Based on Papers Presented at the 7th International Conference on Computational Stochastic Mechanics (CSM7)):28-34.. 2016.
Validity of stationary probabilistic models for wind speed records of varying duration. Renewable Energy. 69:74-81.. 2014.
Modern Examples of Structural Art in Metals. Structures Congress 2015. :714-729.. 2015.
Variability of the compressive strength of parallel strand lumber. Journal of Engineering Mechanics. 136(4):405-412.. 2010.
Effect of pathogen concentrations on removal of cryptosporidium and giardia by conventional drinking water treatment. Water Research. 42(10-11):2678-2690.. 2008.
Molecular approach to evaluate biostimulation of 1,2-dibromoethane in contaminated groundwater. Bioresource Technology. 123:207-213.. 2012.
Diversity and abundance of ammonia-oxidizing bacteria in activated sludge treating different types of wastewater. Journal of Microbiology and Biotechnology. 20(7):1128-1133.. 2010.
Biodegradation of low concentrations of 1,2-dibromoethane in groundwater is enhanced by phenol. Applied Microbiology and Biotechnology. 98(3):1329-1338.. 2013.
Information Impacts on Traveler Behavior and Network Performance: State of Knowledge and Future Directions. Advances in Dynamic Network Modeling in Complex Transportation Systems. 2:193-224.. 2013.
Conjunctive-management models for sustained yield of stream-aquifer systems. Journal of Water Resources Planning and Management. 129(1):35-48.. 2003.
Projected impacts of climate change on salmon habitat restoration. Proceedings of the National Academy of Sciences. 104(16):6720–6725.. 2007.
A Mastery-based Learning Approach for Undergraduate Engineering Programs. 42nd Annual Frontiers in Education Conference.. 2012.
DTA2012 Symposium: Combining disaggregate route choice estimation with aggregate calibration of a dynamic traffic assignment model. Networks and Spatial Economics. 15(3):559–581.. 2015.
A dynamic traffic assignment model for highly congested urban networks. Transportation Research Part C: Emerging Technologies. 24:62-82.. 2012.
Case study assessment of crash data challenges: Linking databases for analysis of injury specifics and crash compatibility issues. Transportation Research Record. 1953:180-186.. 2006.
Verification of box test model and calibration of finite element model. Transportation Research Record: Journal of the Transportation Research Board. 2261:171-177.. 2011.
Sustainable water management using environmental flows In The Connecticut River. Civil and Environmental Engineering. Masters. 2013.
Torsion of cold-formed steel lipped channels dominated by warping response. Thin-Walled Structures. 98(Part B):565–577.. 2016.
Modeling manganese removal in a pilot-scale postfiltration contactor. Journal American Water Works Association. 107(2):E109-E119.. 2015.
Benchmarking wide swath altimetry-based river discharge estimation algorithms for the Ganges river system. Water Resources Research. 52(4):2439-2461.. 2016.
Measurement of Remolded Undrained Shear Strength of Soft Sediments using the Push Cone. 5th International Symposium on Submarine Mass Movements and Their Consequences.. 2011.
The effect of ozonation on natural organic matter removal by alum coagulation. Water Research. 41(7):1516–1524.. 2007.
Effect of ozonation on some physical and chemical properties of aquatic natural organic matter. Ozone: Science & Engineering The Journal of the International Ozone Association . 16(2):89-112.. 1994.
Modeling pH and ionic strength effects on proton and calcium complexation of fulvic acid: A tool for drinking water-NOM studies. Environmental Science & Technology. 31(3):765-770.. 1997.
Increasing flexural capacity of reinforced concrete beams using carbon fiber-reinforced polymer composites. ACI Structural Journal. 100(1):36-46.. 2003.
Evaluation of seasonal and yearly behavior of an Integral abutment bridge. Journal of Bridge Engineering. 12(3):296-305.. 2007.
Increasing the flexural capacity of an existing reinforced concrete bridge in Texas using CFRP composites. Field Applications of FRP Reinforcement: Case Studies. 215:203-218.. 2003.
Full-scale tests of bridge components strengthened using carbon fiber-reinforced polymer composites. Structural Journal. 100(6):775-784.. 2003.
Performance of conventionally reinforced coupling beams subjected to cyclic loading. Journal of Structural Engineering. 137(6):665-676.. 2011.